Daily protection and maintenance of automatic dosing machine

The automatic dosing machine needs to be maintained by maintenance personnel who understand the structure and characteristics of the dosing machine and regularly inspect and maintain it to ensure the safety, reliability and long-term operation of the dosing machine. Below, I will talk about the daily maintenance and maintenance of the dosing machine. Maintenance precautions.

1. First, before starting the dosing machine, you need to add oil to the motor bearings, inner rolling bearings and transmission. Add 2% calcium lithium grease to the motor bearings and inner rolling bearings, and 30% mechanical oil to the transmission. Add the amount of oil into the oil cup. High center part.

2. The motor bearings and inner rolling bearings of the automatic dosing machine should be replaced with lubricating oil every half a year of operation. If the transmission oil is short of oil in the oil cup, it should be replaced in time. All the oil in the transmission should be poured out every half a year of operation. It's time to replace it again.

3. Every time the transmission of the dosing machine is operated for one year, all the components in the transmission must be poured out and the transmission should be cleaned with detergent. At the same time, check whether the gears in the transmission are seriously damaged or damaged. If It is necessary to replace the gear or transmission.

4. Protective employees need to regularly check the operating status of the automatic dosing machine. Whether there is any noise, overheating or vibration out of range of each rolling bearing.